Toshiba TDP-S9 - Manual (Page 37)

37
Other
s
Status display
The indicator informs you of projector state.
The projector is powered and ready.
The projector system has some problems with its fan, so the
projector cannot start up.
The projector is in good condition on working.
The lamp is in good condition and is projecting at maximum
brightness.
The lamp has reached its end of life and must be changed soon.
The lamp will continue to operate until it fails. Change the lamp. If
the lamp is off, then the ballast will become malfunction.
The projector is shutting down. The fan motor is cooling the lamp
for shutdown. Do not unplug the power cable or turn the power
switch off before the lamp LED turns off. The fan motor
Temperature is too high. The lamp will turn off.
PRECAUTION
• Make sure to unplug the power cord if something goes wrong.
Others
(Green)
Flashing
(Green)
Flashing
(Amber)
(Green) (Green)
(Green) (Green)
(Green) (Amber)
(Green)
Flashing (Green)
(Amber)
Flashing
(Green)