Toshiba TDP-S9 - Manual (Page 32)

32
Using the menu (Continued)
■ Advanced menu
Use this menu to set the related items.
Item Description
Auto Source Select Automatically scans the input source.
Use to apply.
Rear The image is reversed horizontally.
Use to apply.
Ceiling The image is inverted vertically.
Use to apply.
ECO Mode Uses this function to dim the projector lamp light output which will
lower power consumption and increase lamp life.
ON OFF
* Pressing repeatly will also change on and off.
Lamp Hours Displays operating hours since lamp timer reset. Lamp hour
counter is displayed in read-only format, and this setting cannot
be manually adjusted.
Color Space Manually selects signal type. It is selectable for RGB input signal
only.
RGB YCbCr YPbPr
Auto Shutdown Uses this fnction to automatically turn off the lamp if the projector
does not detect an input signal for specified time period (30
minutes).
ON OFF
OSD Timeout Duration on-screen display menu stays active (at idle state in second).
Switch with and .
Menu Position Selects the position of on-screen display menu on the screen.
Switch with and .
Factory Reset Resets the projector to its factory default settings.
[Control panel’s MENU/ remote control’s Enter: Enter its sub-
menu] [ : Select setting] [Control panel’s MENU/
remote control’s Enter: Apply]
: Apply. : Chancel.