Toshiba 32SL410U - Manual (Page 35)

35
Chapter 6: Using the TV’s features
* To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide®
picture (TheaterWide 2 and 3 only)".
Scrolling the TheaterWide
®
picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 modes for each
input.
To set the scroll settings:
1
Press and open the Picture menu.
2
Highlight Theater Settings and press .
3
In the Picture Size field, select either
TheaterWide 2 or TheaterWide 3 (you cannot
scroll in any other mode).
4
Press T to highlight the Picture Scroll field.
5
Press W or X to scroll the picture up and down as
needed.
6
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
Note: When receiving a signal at 480i resolution,
the picture scroll function may have limited
adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of
the following input sources is received:
• A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
• A 480i signal from the Video or ColorStream HD
input
• A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz)
signal from the HDMI 1/HDMI 2 input
Note: The auto aspect ratio feature is not
applicable to PC input.
To turn on the auto aspect ratio feature:
1
Press and open the Picture menu.
2
Highlight Theater Settings and press .
3
In the Auto Aspect Ratio field, select On.
4
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Video,
ColorStream HD
(component video), or HDMI inputs
on the TV, smoother motion can be obtained by
setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1
Press and open the Picture menu.
2
Highlight Theater Settings and press .
3
In the Cinema Mode field, select Film.
4
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
To set the Cinema Mode to Video:
Select Video in step 3 above.
Picture
Mode Sports
Picture Settings
Noise Reduction
Game Mode
Off
Theater Settings
Aspect ratio of
signal source Automatic aspect size
(automatically selected when
Auto Aspect is On)
4:3 normal Normal (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined (no
ID-1 data or
HDMI aspect data) The current picture size you set
under "Selecting the picture
size" on page 33.