Toshiba 32SL410U - Manual (Page 26)

26
Chapter 5: Setting up your TV
Setting channel skip
To prevent certain channels from being viewed,
channel positions can be skipped.
1
From the Setup menu, highlight Installation and
press .
2
Press S or T to select Channel Options and press
. The list of channels will appear.
3
Press S or T to select a channel position to be
skipped and press . A symbol will appear in
the box. To remove the symbol, press
again.
To add a channel to the channel memory:
Highlight the checked box next to the channel
number you want to add, and then press
to
remove the symbol.
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash ( ) on the
remote control to enter the channel number (for
example, 56-1).
If the channel is found, the number will be added to
the list and the box will be unchecked. If the channel
is not found, a message will appear.
Note: Skipped channels cannot be selected with
or ; however, they can still be accessed
using the number keys on the remote control.
Labeling channels
A list of common channel labels (logos) for various
channels (ABC, CBS, etc.) will be programmed into
the TV. You will be able to view and assign these
logos from the Channel Labeling window. If the
desired channel label is not provided in the list, you
will be able to manually enter/edit labels using the
software keyboard.
To assign channel labels:
1
Press and open the Preferences menu.
2
Highlight Channel Labeling and press . The
Channel Labeling window opens.
3
Press or to select the channel you want to
label.
4
Press STWX to highlight the desired channel
label and press .
5
Repeat steps 3 and 4 for other channels.
6
To save your settings, highlight Done and press
.
The maximum number of labels that can be stored is
128.
To remove channel labels:
1
Open the Channel Labeling window.
2
Press or to select the channel for which
you want to remove the label.
3
Press STWX to highlight No Label and press
.
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and press
.
If the desired channel label is not available from the
list of presets, you can create a custom label.
Channel Options
1 Digital
2 Analog
3 Digital
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
Ch. Type
Channel Labeling
{No Label}
A&E
ABC
ABCFAM
ABCHD
AMAX
AMAXW
AMC
ANIMAL
ANT/CABLE
16-1
A&E
Press CH UP/DOWN to
change channels.
Custom
Clear All
Done