Table 2-2, Dc-in led – Toshiba SATELLITE A200 User Manual

Page 41

2 Troubleshooting Procedures

Satellite A200/A205/Pro A200 Series Maintenance Manual

[CONFIDENTIAL]

Table 2-2 DC-IN LED

AC-IN LED

Power supply status

Solid on

AC power exists (LED is solid Blue).

Off

No AC power exists.

To check the power supply status, install a battery pack and connect an AC adaptor to the
DC-IN port on the computer and to a power supply.

If the DC-IN LED or Battery LED is not lit, go to Procedure 2.

Procedure 2

Adaptor / battery replacement

A faulty adaptor may not supply power or may not charge the battery. Perform Check 1.

Check 1

Connect a new AC adaptor. If the problem is not resolved, go to Check 2.

Check 2

Insert a new battery. If the problem is still not resolved, go to Procedure 3.