Tyan Computer TIGER MP S2460 - Manual (Page 38)

http://www.tyan.com 38
(advanced setup, continued)
3.2-A. Chipset Configuration screen
Options related to the graphics interface can be altered through this screen.
DMA1
DMA3 These options appear
when parallel port is set to
‘Enabled’.
FORMAT: [option]
OPTIONS:
DMA Channel
PCI Configuration Discussed on p. 40
32MB
64MB
128MB
256MB
512MB
1GB
None Sets the size of the mem-
ory area reserved for stor-
age of graphics data
structures used by the
AGP.
FORMAT: [option]
OPTIONS:
Graphics Aperture
None
ERR signal output for a
single bit
FORMAT: [option]
OPTIONS:
SERR Signal Condition
Disabled No error checking.
FORMAT: [option]
OPTIONS:
ECC Config
ERR signal output for
multiple bits
Single bit
Multiple bits
Both ERR signal output for
both instances.
ERR signals not output
under any condition.
EC (single bit) Error checking & status
report enabled. Data not
corrected.
ECC (multiple bits) Error checking & status
report enabled. Data is
corrected.
ECC Scrub Error checking & status
report enabled. Data is
corrected. Memory con-
tents are corrected
(scrubbed) after all reads
with errors.