Image overlay protecting images – Olympus E-P2 User Manual
Page 87

87
EN
5
Pl
ayback
f
u
nct
ions
Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is saved.
1
MENU[q][EDIT][IMAGE OVERLAY]
• Selection is also possible during playback by pressing the
i button.
2
Select the number of frames to overlay and press the
i button.
3
Use
k to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the
i button again.
4
Use
hi to select an image, then use fg to
select the brightness for each image. Press the
i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the brightness is
adjusted.
5
Use
fg to select [YES], then press the i
button.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are
displayed.
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the
0
button.
•
9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the
0
button.
Image overlay
Protecting images
IMAGE OVERLAY
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
BACK
SET
x0.3
x0.3
x0.1
x0.1
x0.3
x0.3
IMAGE OVERLAY
BACK
SET
i button
0 button
s0026_e_00_0_unified.book Page 87 Tuesday, September 29, 2009 10:30 AM