Olympus E-P2 User Manual
Page 114

114
EN
Pr
int
in
g
8
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is available,
you cannot change the setting.
[SIZE]
Sets the paper size that the printer
supports.
[BORDERLESS]
Selects whether the picture is printed
on the entire page or inside a blank
frame.
[PICS/SHEET]
Selects the number of pictures per
sheet. Displayed when you have
selected [MULTI PRINT].
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can be printed later (single-frame
reservation) or the picture you are displaying can be printed right away.
[PRINT] (
f)
Prints the currently displayed
picture. If there is a picture that
[SINGLE PRINT] reservation
has already been applied to,
only that reserved picture will
be printed.
[SINGLE PRINT] (
t)
Applies print reservation to the
currently displayed picture. If
you want to apply reservation to
other pictures after applying
[SINGLE PRINT], use
hi to
select them.
[MORE] (
u)
Sets the number of prints and other items for the currently displayed
picture, and whether or not to print it.
For operation, refer to “Setting printing data” (
gP. 115) in the next
section.
PRINTPAPER
STANDARD
STANDARD
SIZE
BORDERLESS
BACK
SET
PRINTPAPER
SIZE
PICS/SHEET
STANDARD
16
BACK
SET
SINGLEPRINT
SELECT
MORE
123-3456
123-3456
15
15
s0026_e_00_0_unified.book Page 114 Tuesday, September 29, 2009 10:30 AM