Oceanic Personal Dive Computer Veo 100Nx User Manual

Page 27

TO SET - FO2 50% DEFAULT

Factory set ON, the FO2 50% Default feature can be set to

OFF. The effects of this feature being ON or OFF are described

on page 16.

After having set and accepted the PO2 Alarm Set Point, the

Set FO2 50% Default screen appears with the Set Point

flashing (Fig. 25).

- - or - -

While the Surface Sequence is scrolling, depress the button

for 16 seconds.

Release the button when the Set FO2 50 screen appears

with the Set Point flashing.

Press/release the button (less than 2 seconds) to toggle

between ON and OFF.

Depress the button for 2 seconds to accept the Set Point and

advance to the Surface Mode screen and Surface Sequence.

Fig. 25 - SET FO2 DEFAULT