Oceanic Personal Dive Computer Veo 100Nx User Manual

Page 20

If the wet contacts are bridged, the graphic H2O will appear in

place of the dive number 0 (Fig. 16). After the unit is rinsed and

dried, 0 will replace H2O.

While the Surface Sequence is scrolling -

press/release the button (< 2 seconds) to access Log Mode.

depress the button for 2 seconds to access Set Mode.

SET MODE

After gaining access to Set Mode, settings can be made in

sequence one after the other, or you can access a specific item

that you want to set, bypassing others.

Set Mode Access/Timing

To access Set Mode while the Surface Sequence is scrolling,

press/release the button momentarily (< 2 seconds).

Upon entry into Set Mode, the Set FO2 screen will be

displayed with the Set Point flashing (Fig. 17).

If the button is not pressed during a 2 minute period while in

the Set Mode, the unit will revert to Surface Mode and

resume the Surface Sequence scroll.

Fig. 17 - SET MODE ENTRY

Fig. 16 - SURFACE MODE

(module is wet)