Oceanic Personal Dive Computer Veo 100Nx User Manual

Page 26

TO SET - PO2 ALARM

Factory set for 1.60 (ATA), the PO2 Alarm can be set to values

between 1.20 and 1.60 (ATA) in increments of .10 (ATA).

After having set and accepted the Time, the Set PO2 Alarm

screen appears with the Set Point flashing (Fig. 24).

- - or - -

While the Surface Sequence is scrolling, press the button for

14 seconds to bypass Set FO2, Wet Activation, Units, Hour

Format, and Time.

Release the button when the Set PO2 Alarm screen appears

with the PO2 Set Point flashing.

Press/release the button repeatedly (less than 2 seconds

each time) to advance the PO2 Alarm setting in increments

of .10 (ATA) per press of the button.

Depress the button for 2 seconds to accept the PO2 Alarm

Set Point and advance to Set FO2 Default.

Fig. 24 - SET PO2 ALARM