Optiview TRKPTZ -26NX - Manual (Page 53)

Auto Zooming Tracking Dome Camera User Manual
52
3.7 Dome Label
From the menu shown in Fig3.1, move the cursor to
, press Open to enter the following menu
(Figure .32)
Figure 3.32 DOME LABLE
: To edit the dome description and
information. Please refer to 3.5.4 Edit Preset Label
”.
: Clear current dome label. Press
Open to enter the menu and then operate with instructions.
3.8 Other Functions
RESET CAMERA:
If the camera does not operate or if you close camera
‟s
control, cycle camera power. Cycling camera power resets the
camera but does not change any saved camera settings.
REBOOT SYSTEM:
Reboot the system if it does not operate or if there is no
control. Rebooting the system will cycle dome and camera power
without changing programmed dome settings.
Ω
DOME LABLE
BACK
EXIT