Optiview TRKPTZ -26NX - Manual (Page 37)

Auto Zooming Tracking Dome Camera User Manual
36
ZONES section.
CLEAR PRESETS:
Clear all presets. To clear a specific preset, please refer to
the PRESETS section.
CLEAR PATTERNS:
Clear all patterns. To clear a specific pattern, please refer to
the PATTERNS section.
RESTORE FACTORY DEFAULTS:
This is to restore leaving-factory
‟s default settings.
3.5.9 Presets Number
This is to set the dome
‟s preset number.
3.6 Dome Settings 2 Menu
Move joystick to select , then press
Open to enter the dome settings 2 menu shown as Fig 3.17.
DOME SETTINGS 2
CRUISE SETTING
TRACKING SETTING
BACK
EXIT