Optiview TRKPTZ -26NX - Manual (Page 38)

Auto Zooming Tracking Dome Camera User Manual
37
Figure 3.17 DOME SETTINGS
3.6.1 Alarms
Move joystick to select , then press Open to
enter the alarms menu shown as Fig 3.18.
Figure 3.18 ALARMS
The dome has seven alarm inputs, which can be
programmed as high, medium or low priority. When an alarm is
received, the inputted signal to the dome triggers the
user
–defined action (go to preset, run pattern, etc.) programmed
for the alarm.
There are three alarm settings:
ALARM NUMBER:
Use this to select alarms number.
SEQUENCE:
This is the time the dome will perform an alarm activity when
more than one alarm of the same priority occurs at the same
time.
RESET DELAY:
ALARMS
ALARM NUMBER 1
SEQUENCE(SECS) 1
< ALARM SETTINGS >
BACK
EXIT