Optiview TRKPTZ -26NX - Manual (Page 44)

Auto Zooming Tracking Dome Camera User Manual
43
3.6.5 Windows Blanking
Move joystick to select , then
press Open to enter the windows blanking menu shown as Fig
3.23.
Figure 3.22 WINDOWS BLANKING
Window blanking enables you to program up to eight,
four-sided, user-defined areas that cannot be viewed by the
operator of the dome system. A blanked area will move with pan
and tilt functions and automatically adjust in size according to
zoom times.
Style:
The dome has two styles for window blanking, GRAY and
SMEAR. If style is set to gray, the blanked area is covered with a
solid gray window. If smear is selected images behind the
window will be noticeable but not distinguishable.
BLANK ALL ABOVE/BLANK ALL BELOW:
The dome camera has two style modes for window blanking,
GRAY and SMEAR. If style is set to gray, the blanked area is
covered with a solid gray window. If smear is selected images
behind the window will be noticeable but not distinguishable.
WINDOWS BLANKING
STYLE GRAY
BLANK ALL ABOVE OFF
BALANK ALL BELOW OFF
BACK
EXIT