Optiview TRKPTZ -26NX - Manual (Page 30)

Auto Zooming Tracking Dome Camera User Manual
29
(3) Follow the directions displayed on the monitor.
SET AZIMUTH ZERO:
Azimuth is the pan angle from 0°to 359°.Azimuth zero is
the pan position you specify to be the 0°point. Azimuth zero is
normally set to magnetic north. Once set, azimuth and compass
readings are based on the set Azimuth Zero point.
To program azimuth zero:
(1) Move joystick to position the cursor beside set azimuth
zero.
(2) Press iris Open.
(3) Follow the directions displayed on the monitor.
CLEAR AZIMUTH ZERO:
(1) Move joystick to position the cursor beside CLEAR
AZIMUTH ZERO.
(2) Press iris Open
(3) Follow the directions displayed on the monitor.
3.5.4 Power Up
Move joystick to select , press Open to enter the
power up menu shown as Fig3.10.
Figure 3.10 POWER UP
POWER UP ACTION:
POWER UP
POWER UP ACTION NONE
BACK
EXIT