Optiview TRKPTZ -26NX - Manual (Page 33)

Auto Zooming Tracking Dome Camera User Manual
32
(3) Edit preset scene:
a. Move joystick to position the cursor beside EDIT
PRESET SCENE.
b. Press iris Open.
c. Follow the direction displayed on the monitor.
(4) Clear a preset:
a. Move joystick to position the cursor beside CLEAR
PRESET.
b. Press iris Open.
c. Follow the direction displayed on the monitor.
3.5.6 Patterns Setting
Use stick to select Open to enter the patterns
menu shown as Fig3.13.
Figure 3.13 PATTERNS
PROGRAME PATTERN:
A pattern is function that the camera can save its moving
course, and will repeat that course when demanded.
To program a pattern:
(1) Move joystick to position the cursor beside PATTERN
NUMBER, and then press iris Open.
PATTERNS
PATTERN NUMBER 1
BACK
EDIT