Optiview TRKPTZ -26NX - Manual (Page 18)

Auto Zooming Tracking Dome Camera User Manual
17
(2) Press iris Open.
3.4 Display Setup
3.4.1 Display Setup
Move joystick to select , press Open to
enter the display setup menu shown as Fig3.3.
Figure 3.3 DISPLAY SETUP
Display setup enables you to program how labels are
displayed on the monitor. The following labels are available:
PRESET LABEL: Identifying preset.
ZONE LABEL: Identifying zone.
ZOOM: Identifying zooming times.
AZIMUTH/ELEVATION: Amount of pan from 0°and the
amount of tilt from 0°horizontal.
CAMERA LABEL: Identifying dome.
A preset label is displayed when a preset is called. A zone
label is displayed when the system moves into a zone. The zoom
DISPLAY SETUP
PRESET LABEL ON
ZONE LABEL ON
ZOOM ON
AZIMUTH/ELEVATION ON
CAMERA LABEL ON
BACK
EXIT