Onkyo DV-SP506 - Manual (Page 26)

26
Connecting the DV-SP506 —Continued
■ HDMI Audio Output setting set to 2ch PCM
Notes:
• The 2-channel D.MIX/FRONT output signal is the same as Multichannel.
• The D.MIX/FRONT 1 and 2 outputs output the same signals.
■ HDMI Audio Output setting set to Off
Notes:
• The 2-channel D.MIX/FRONT output signal is the same as Multichannel.
• The D.MIX/FRONT 1 and 2 outputs output the same signals.
Audio output
HDMI OPTICAL & COAXIAL
Analog output
Disc type Audio format Multichannel
*1
Audio CD 44.1 kHz PCM S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 2ch
DVD-Video
96 kHz PCM S/PDIF (48 kHz) S/PDIF (48 kHz) 2ch
48 kHz PCM S/PDIF (48 kHz) S/PDIF (48 kHz) 2ch
Dolby Digital, DTS S/PDIF (48 kHz) S/PDIF (48 kHz) 6ch
DVD-Audio
2ch 176.4/192 kHz S/PDIF (44.1/48 kHz) S/PDIF (44.1/48 kHz) 2ch
6ch 88.2/96 kHz S/PDIF (44.1/48 kHz) S/PDIF (44.1/48 kHz) 6ch
6ch 44.1/48 kHz S/PDIF (44.1/48 kHz) S/PDIF (44.1/48 kHz) 6ch
SACD
Multichannel S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 6ch
*2
2-channel S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 2ch *2
CD area S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 2ch
*1 Changes depending on the following settings: Subwoofer, Front Speaker, Center Speaker, Surround Speaker, Dolby Pro Logic.
*2 Analog audio is converted to PCM.
Audio output
OPTICAL & COAXIAL Analog output
Disc type Audio format Down Sample Off Down Sample On Multichannel *1
Audio CD 44.1 kHz PCM S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 2ch
DVD-Video
96 kHz PCM S/PDIF (96 kHz) S/PDIF (48 kHz) 2ch
48 kHz PCM S/PDIF (48 kHz) S/PDIF (48 kHz) 2ch
Dolby Digital, DTS Bitstream *2 Bitstream *2 6ch
DVD-Audio
2ch 176.4/192 kHz No output S/PDIF (44.1/48 kHz) 2ch
6ch 88.2/96 kHz S/PDIF (88.2/96 kHz) S/PDIF (44.1/48 kHz) 6ch
6ch 44.1/48 kHz S/PDIF (44.1/48 kHz) S/PDIF (44.1/48 kHz) 6ch
SACD
Multichannel No output S/PDIF (44.1 kHz) *3 6ch
2-channel No output S/PDIF (44.1 kHz) *3 2ch
CD area S/PDIF (44.1 kHz) S/PDIF (44.1 kHz) 2ch
*1 Changes depending on the following settings: Subwoofer, Front Speaker, Center Speaker, Surround Speaker, Dolby Pro Logic.
*2 When the Digital Audio Out setting is set to PCM, the signal is converted to PCM.
*3 When the SACD Audio Setup setting is set to DSD, nothing is output by the OPTICAL and COAXIAL outputs.