Onkyo HTX-22HD - Manual (Page 26)

26
Connecting AV Components —Continued
Connecting an Onkyo DVD player or RI Dock with iPod to the HTX-22HD with an cable
and RCA audio cable will alow you to use the following system control functions. An cable
is a special cable for use with Onkyo’s (Remote Interactive) control system.
Auto Power On/Standby
If you turn on or start playback on the Onkyo DVD player or RI Dock with iPod, the HTX-22HD
will automatically turn on and select the DVD player or iPod as the input source. Similarly, when
the HTX-22HD is tuned on or set to Standby, the DVD player and iPod will also turn on or go
on Standby.
Direct Change
When playback is started on the Onkyo DVD player or RI Dock with iPod, the HTX-22HD
automatically selects the DVD player or iPod as the input source.
Remote Controller Operation
In addition to controlling the HTX-22HD, you can also use the HTX-22HD’s remote controller
to control an Onkyo DVD player or RI Dock with iPod. When doing so, remember to point the
remote controller at the HTX-22HD and not at the DVD player or RI Dock. Hookup information
is shown below. The remote controller buttons that you can use to control an Onkyo DVD player
or RI Dock with iPod are explained on pages 28 and 29.
■ Hookup
The following diagram shows how to connect an Onkyo DVD player and RI Dock with iPod to
the HTX-22HD for
operation. Use the cables supplied with the DVD player and RI
Dock. An cable is not supplied with the HTX-22HD.
Notes:
• To use functionality with your Onkyo DVD player, you must assign the HTX-22HD
LINE 1 or LINE 2 input to which the DVD player is connected to the DVD input selector (see
page 36). The DVD player must be connected to LINE 1 or LINE 2 even if it’s already con-
nected to a digital audio input.
Connecting Onkyo Components
DISPLAY
STANDBY / ON
STANDBY
REPEAT
SUPER AUDIO CD & DVD AUDIO / VIDEO PLAYER
VIDEO OFF PROGRESSIVE SURROUND
IN1
DIGITAL
OPTICAL
IN2
cable
DVD player RI Dock
L/R audio
out
RCA audio cable
cable
L/R audio
out
RCA audio cable