Olympus PER-E01 - Manual (Page 15)

E-5
ቢ Screw the camera table provided with the PT-E
series case firmly into the bottom of the cam-
era.
4 Loading the Camera and Lens
After installing the EC-14 ZUIKO DIGITAL 1.4X TELECONVERTER rear converter between the camera
and lens, insert the camera and lens into the PT-E series case on which the PER-E01 and the PPO-E
series lens port are mounted.
ባ Remove the eyecup from the camera’s viewfind-
er. If a lens cap or filter is attached to the lens or
the strap is attached to the camera, remove them
as well.
ብ Lift the PT- E series case’s power switch dial,
mode dial knob and zoom dial, and turn the
case’s camera table lock lever counterclock-
wise to release the lock. Refer to the PT-E
series case’s instruction manual for instructions
of how to attach the hot shoe cable for the
flash.
Zoom dial
Mode dial knob
Power switch dial
Camera table lock lever
ቤ Install the separately available EC-14 ZUIKO
DIGITAL 1.4X TELECONVERTER rear converter
between the camera and lens as instructed in the
rear converter’s manual.