Olivetti D-COLOR P26 - Manual (Page 113)

Menu functions> 113
PCL
EMULATION
This menu controls settings effective when the printer is
operating in PCL emulation mode.
I TEM S ETTINGS E XPLANATION
FONT
SOURCE RESIDENT /
DIMM0 / DIMM1 /
DOWNLOADED Specifies the location of the PCL
default font. Normally this will be
INTERNAL unless additional fonts
are installed in the expansion ROM
slot or additional fonts have been
downloaded to RAM as permanent
fonts.
FONT No. I0/ C001 / S001 Sets the current default font
number from the currently
selected source, which could be
internal (I), ROM slot (C) or
downloaded (S).
FONT HEIGHT 4.00 POINT~12.00
POINT~999.75
POINT
Point size of selected default font.
SYMBOL SET PC-8 PCL symbol set. If the font source
and number are changed to one
which does not support the
selected symbol set, this must be
changed to an available symbol set
for that font.
A4 PRINT
WIDTH 78 COLUMN
80 COLUMN Sets the number of columns
subject to Auto LF with A4 paper in
PCL. This is the value when Auto
CR/LF Mode is set to OFF with the
10CPI character.
WHITE PAGE
SKIP OFF / ON Selects whether blank pages are
printed or not.
CR FUNCTION CR / CR+LF Selects whether a received
carriage return character (0Dh)
also causes a line feed.
LF FUNCTION LF / LF+CR Selects whether a received line
feed character (0Ah) also causes a
carriage return.
PRINT
MARGIN NORMAL
1/5 INCH
1/6 INCH Sets the non-printable page area.
NORMAL is PCL compatible.