One for All CINEMA 7+ URC 7800 User Manual

Page 8

Web Site : http://www.oneforall.com

press POWER. The unit should turn off. If it does not
respond, Repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
TV/VCR Combo.

NOTE: If you have tried all the codes listed for your
brand and your TV/VCR Combo does not respond,
try using the search method found on page 22.

Your Cinema 7+™ is now programmed to operate
your TV/VCR Combo. Write your TV/VCR Combo
code in the boxes to the left for future reference.

Remember, to use your Cinema 7+™ to operate your
TV/VCR Combo, press the VCR key first.

Setup Codes For TV/VCR Combos

American High

0035*

Brocksonic

0002, 0294, 0479

Colt

0072

Curtis Mathes

0035*

Daewoo

0278*

Emerson

0002, 0294, 0479

Funai

0000

0035*, 0060*, 0048*, 0240

Hitachi

0035*, 0000

0000

Lloyds

0000

Magnavox

0000, 0035*, 0081*

Magnin

0240

Memorex

0037, 0162*

MGA

0240

Mitsubishi

0048*

Orion

0002, 0294, 0479

Panasonic

0035*, 0162*

Penney’s

0035*, 0240, 0162*

Quasar

0035*, 0162*

RCA

0035*, 0060*, 0048*

Sansui

0000, 0479

Sanyo

0240

Sears

0000, 0037

Sony

0032*

Symphonic

0000

Zenith

0000

NOTE

If your TV/VCR works with one of the above codes highlight-

ed with an asterisk (*), you may need to program a separate TV
code to control the volume. Check the list of codes below and follow
the instructions in the “Programming the Cinema 7+™ to Operate
Your TV” section to program the supplied TV code.

TV/VCRs working on VCR code 0032 may require

TV code 0000 for volume control.

TV/VCRs working on VCR code 0035 may require

TV code 0051 for volume control.

TV/VCRs working on VCR code 0048 may require

TV code 0093 for volume control.

TV/VCRs working on VCR code 0060 may require

TV code 0047 for volume control.

TV/VCRs working on VCR code 0081 may require

TV code 0054 for volume control.

TV/VCRs working on VCR code 0162 may require

TV code 0250 for volume control.

TV/VCRs working on VCR code 0278 may require

TV code 0451 for volume control.

Programming the Cinema 7+™ to operate your DVD or
Laser Disc Player:
Locate the brand name of your DVD or Laser Disc Player in
the DVD or Laser Disc Player setup codes (starting below),
and write it in the space below.

DVD/LD Player Brand: ______________________

The brands are listed in alphabetical order with the most pop-
ular codes listed first. You will use one of these codes to pro-
gram your Cinema 7+™ to operate your DVD or Laser Disc
Player as follows:

Turn on your DVD or Laser Disc Player and insert a
disc.

Press DVD/LD and release. Press and hold SETUP
until the Cinema 7+™’s red light blinks twice, then
release SETUP.

Enter the first four-digit DVD or Laser Disc Player
code listed for your brand. If performed correctly, the
red light will blink twice when entering the final digit.

Aim the Cinema 7+™ at your DVD or LaserDisc
Player and press POWER. Your DVD or Laser Disc
Player should turn off. If it does not respond, repeat
steps 2-4, trying each code listed for your brand until
you find the one that works.

NOTE: If you have tried all the codes listed for your
brand and your DVD or Laser Disc Player does not
respond, try using the search method found on page
22.

Your Cinema 7+™ is now programmed to operate your
DVD or Laser Disc Player. Write your DVD or Laser
Disc Player code in the boxes to the left for future refer-
ence.

Remember, to use Cinema 7+™ to operate your DVD or
Laser Disc Player, press the DVD/LD key first.

Setup Codes for DVD Players

JVC

0558

Kenwood

0534

Magnavox

0503

Mitsubishi

0521

Onkyo

0503

Panasonic

0490

Philips

0539, 0503

Pioneer

0525, 0571

Proscan

0522

RCA

0522

Samsung

0573

Sony

0533

Technics

0490

Toshiba

0503

Yamaha

0490, 0545

Zenith

0503

Setup Codes for Laser Disc Players