One for All CINEMA 7+ URC 7800 User Manual
Page 10
Satellite Receiver Brand: ____________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first. You will use one of these codes to pro-
gram your Cinema 7+™ to operate your Cable Converter or
Satellite Receiver as follows:
1.
Turn on your Cable Converter or Satellite Receiver.
2.
Press CBL/SAT and release. Press and hold SETUP
until the Cinema 7+™’s red light blinks twice, then
release SETUP.
3.
Enter the first four-digit Cable Converter or Satellite
Receiver code listed. If you perform this procedure
correctly, the red light will blink twice when you enter
the final digit of your code.
4.
Aim the Cinema 7+™ at your Cable Converter or
Satellite Receiver and press POWER. Your Cable
Converter or Satellite Receiver should turn off. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
operates your Cable Converter or Satellite Receiver.
NOTE: If you have tried all the codes listed for your
brand and your Cable Converter or Sateliite
Receiver does not respond, try using the search
method found on page 22.
5.
Your Cinema 7+™ is now programmed to operate
your Cable Converter or Satellite Receiver. Write
your Cable Converter or Satellite Receiver code in
the boxes to the left for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your Cable Converter or Satellite Receiver, press the
CBL/SAT key first.
Setup Codes for Cable Converters
ABC
0003, 0008, 0014, 0007, 0001, 0011, 0013, 0017
Allegro
0153, 0315
Gantronix
0022, 0207
Archer
0797, 0153, 0022, 0207
Belcor
0056
Cable Star
0056
Cabletenna
0022
Cableview
0022
Century
0153
Citizen
0153, 0315
Colour Voice
0031
Comtronics
0040
Contec
0019
Digi
0637
Eastern
0002
Emerson
0797
Everquest
0015, 0040
Focus
0400
Garrard
0153
GC Electronics
0056, 0207
Gemini
0015
General
Instrument
0476, 0003, 0014, 0011, 0276, 0810
Goldstar
0144, 0040
Goodmind
0797
Hamlin
0259, 0009, 0020, 0034
Hitachi
0011
19
18
Web Site : http://www.oneforall.com
Web Site : http://www.oneforall.com
boxes to the left for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your CD Player, press the CD key first.
Setup Codes For CD Players
Aiwa
0124, 0157
Bang & Olfusen 0212
Burmester
0420
California Audio
Lab
0029
Carver
0157, 0179, 0437
Denon
0003, 0873
DKK
0000
Emerson
0305
Fisher
0174, 0179
Garrard
0393, 0420
Genexxa
0032, 0305
Harman/Kardon 0173
Hitachi
0032
H/K
0157
JVC
0072
Kenwood
0028, 0037, 0190, 0826, 0681
Krell
0157
Linn
0157
LXI
0305
Magnavox
0157, 0305
Magnavox CD-R 0626
Marantz
0029, 0157, 0180
MCS
0029
Mission
0157
MTC
015 T9n0029, 0157ik,6 T44 0 er
0157