One for All CINEMA 7+ URC 7800 - Manual (Page 5)

Web Site : http://www.oneforall.com
8
Web Site : http://www.oneforall.com
POWER. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
TV.
NOTE: If you have tried all the codes listed for your
brand and your TV does not respond, try using the
search method found on page 22.
5. Your Cinema 7+™ is now programmed to operate
your TV. Write your TV code in the boxes to the left
for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your TV, press the TV key first.
Setup Codes For TVs
Admiral 0093, 0179, 0180, 0016, 0047
Aiko 0092
Akai 0030
Alaron 0179
Ambassador 0177
Ampro 0751
Anam 0180
AOC 0019, 0185, 0003
Audiovox 0451, 0092, 0180, 0003
Baysonic 0180
Beaumark 0017, 0030, 0179
Belcor 0019
Bell & Howell 0154, 0016
Bradford 0180
Brockwood 0019
Candle 0056, 0030
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0060, 0092, 0030, 0056, 0039
Clairtone 0185
Concerto 0056
Contec 0180, 0185
Craig 0180
Crown 0180, 0039
Curtis Mathes 0030, 0060, 0154, 0039, 0466, 1147, 1347
CXC 0180
Daewoo 0451, 0092, 0019, 0039, 0624
Daytron 0019
Denon 0145
Dumont 0017, 0019
Dwin 0720, 0774
Electroband 0000, 0185
Emerson 0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,
0282, 0039, 0624
Envision 0030
Fisher 0154, 0159
Fujitsu 0179
Funai 0171, 0179, 0180
Futuretech 0180
GE 0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347
Gibralter 0019, 0030, 0017
Goldstar 0019, 0030, 0178, 0039
Gradiente 0053, 0056
Grunpy 0179, 0180
Hallmark 0178
Harvard 0180
Hitachi 0145, 0151, 0056
Infinity 0054
JBL 0054
JCB 0000
tional details.
INSTALLING THE BATTERIES
Your Cinema 7+™ requires four (4) new AAA alkaline batter-
ies. To install the batteries:
1. On the back of the Cinema 7+™, pull back on
the tab and lift the battery cover off.
2. Match the + and - marks on the batteries to the
+ and - marks in the battery case, then insert
the
batteries.
3. Press the battery cover back into place.
4. Test the unit by pressing POWER. If the batter-
ies are inserted correctly, the red light will blink.
NOTE: Removing the batteries will not require you to repro-
gram your remote control because the Cinema 7+™ has
unlimited memory backup.
SETTING UP YOUR COMPONENTS
Programming the Cinema 7+™ to operate your TV:
NOTE: If you are trying to program a TV/VCR combination,
do not perform these instructions. Instead, follow the steps in
“Programming the Cinema 7+™ to operate your TV/VCR
Combo” starting on page 13.
Locate the brand name of your TV in the “Setup Codes For
TVs” section (starting on the next page), and write it in the
space below.
TV Brand: ________________________________
The brands are listed in alphabetical order with the most
popular codes listed first. You will use one of these codes to
program your Cinema 7+™ to operate your TV as follows:
1. Turn on your TV.
2. On the Cinema 7+™, press TV and release. Press
and hold SETUP until the red light blinks twice, then
release SETUP.
3. Enter the first four-digit TV code listed for your
brand. If performed correctly, the red light will blink
twice when you enter the final digit.
4. Aim the Cinema 7+™ at your TV and press
9