Onkyo DR-C500 - Manual (Page 31)

31
Various Functions Common
to all the Sources
Adjusting the Volume
The volume of the front left and right, center, surround left
and right, and subwoofer speakers will be adjusted at the
same time.
When headphones are connected (see next page), you can
adjust the volume of the sound through the headphones.
Operating with the remote controller
Press MASTER VOLUME 5/∞.
Operating with the unit
Turn MASTER VOLUME clockwise
to increase the volume, or
counterclockwise (anticlockwise)
to decrease the volume.
Muting the Sound
Press MUTING.
“MUTING” appears in the multipurpose
display for about three seconds. Also the
MUTING indicator flashes in the display
during the muting mode.
To restore the sound, press MUTING again.
Tip
• If you turn off the unit during muting and turn it on again, the
sound will be restored. The sound will also be restored if you
adjust the MASTER VOLUME during muting.
Turning on/off the SPEAKERS A/
SPEAKERS B Systems
You can turn on or off the speaker systems connected to the
FRONT SPEAKERS A and B connectors individually.
Note
When you select “SPEAKER A+B”, the SPEAKER A system
reproduces stereo sound automatically. (The listening mode is set to
“Stereo.”)
When you select “SPEAKER A”, the listening mode returns to the
previous mode.
Operating with the remote controller
Press SP A or SP B repeatedly to turn the
SPEAKERS A or SPEAKERS B system
On/Off.
Each press of the button changes the On/Off
mode.
Remote
controller only
SP A SP B
SLOW STEP
MASTER
VOLUME
MU
TIN
G
MASTER VOLUME
-- / ---
SEND / LEARN
TOP MENU MENU
RETURN ON SCREEN
CH CH VOLUME UP
DOWN
TV / VCR
S TA ND BY / O N
EN TER
LIGHT
DVD RCVR / VCR T V CBL / SAT
INPUT
DIMMER SLEEP
MASTER
VOLUME
PRESET
1 2 3
4 5 6
7 8 9
MEM CLR 0
R EP EA T
A-B RANDOM
MU TIN G
ENTER
PLAY PLAY
SP A SP B FM MODE SURROUND
SP SETUP IPM ACOUSTIC CONTROL LATE NIGHT
AUDIO ANGLE SUBTITLE ZOOM
SW MODE T.TONE CH SEL DISTANCE
PRGV DISC SLOW STEP
RC- 504 M
MODE
– +
MASTER
VOLUME
SP A
MUTING
SP B
PHONES jack
Listening Through Headphones
Connect the plug of the stereo headphones to the
PHONES jack.
Notes
• The speakers will not reproduce sound while headphones are
connected.
• The listening mode is set to “Stereo” after connecting the
headphones to the PHONES jack.
• When you disconnect the headphones, the listening mode returns
to the previous mode.