Oki C5550 MFP - Manual (Page 12)

12
• English
Walk-up Operation
Copy
For more information, check with
your System Administrator or see the
on-line User’s Guide provided with
your system.
Important
The system default is the Copy mode
and the C
OPY
key is illuminated. If it
is not, press the C
OPY
key.
Using the Default Settings
1. Load the document (see page
11).
2. Press the Mono key or the
C
OLOR
key.
Using Special Settings
1. Load the document (see page
11).
2. Use the numeric keypad to set
the number of copies (up to
99).
3. Press the A
DDITIONAL
S
ETTINGS
key.
4. Change the Copy settings* on
the display using the Up,
Down, Left and Right Arrow
keys and the OK key.
5. Press the M
ONO
key or the
C
OLOR
key.
*Copy Settings
The default setting is in bold italic.
Quality Speed, Text, Photo.
Set the print mode which
provides the best results.
E.g., if the document has
many pictures, change
this setting to Photo.
Density -2, -1, 0, 1, 2
Set the print density
higher or lower.
Collate OFF, ON
Duplex OFF, Short Edge, Long
Edge (see page 18).
(appears only when the
optional duplex unit is
installed)
N-up 1in1, 4in1 (Horizontal),
4in1 Vertical).
Set for multiple images
on one page.
Edge Erase 0, 6, 13, 19, 25 mm.
Set amount of document
perimeter to be erased.
Margin Shift
(R) 0, 6, 13, 19, 25 mm.
Set the document image
to shift left or right.
Margin Shift
(B) 0, 6, 13, 19, 25 mm.
Set the document image
to shift up or down.
Paper Supply Legal, Letter, A4, A5.
Input Tray Auto, Tray 1, Tray 2
(appears only if the
optional second tray is
installed), MPT