Omron V400-H111 - Manual (Page 49)

48
Section 4
Ma
king
Sett
ings
on
t
h
e
Ma
in
Bod
y
V400-H111/211
User’s Manual
Section 4
System Settings
Starting Setting Mode (Setup Screen)
1.
Start setting mode.
Setting mode can be started by the following two methods.
A Turn ON the power to the Code Reader
while holding both right and left trigger
buttons.
B Insert the Memory Card into the slot while
holding both right and left trigger buttons.
The setting mode menu window will be displayed.
If the Memory Card does not have a folder called “SETTINGS”, “Upload
Settings” will not be displayed in the menu window. However, it is still
possible to set measurement conditions and functions even if “Upload
Settings” is not displayed, but the set data cannot be uploaded.
2.
Select [Setup].
The Setup window appears.
• Setup window structure
When using the
AC adapter When using the
power supply