Oki C 5200ne - Manual (Page 40)

39
Error Messages (cont.)
CHECK FUSER UNIT
320: FUSER UNIT MISSING
The fuser is not properly installed.
What to Do
Open the top cover and check the
fuser:
1. Press down on the fuser to be sure it
is firmly locked in place. The
message should disappear.
Note : If the message still appears,
push the blue latches at
either end of the fuser back
(toward the printer cover
hinge) and lift the fuser out,
then lower it back into the
printer, pushing it firmly
down in place. You should
feel the latches at either end
engage.
2. Close the cover.
PRESS ONLINE SW
INVALID DATA
The hard disk drive is not available
and job spooling cannot take place.
What to Do
Press the ON LINE button.
CANCELLING JOB
(USER DENIED)
The Job Accounting software has
detected a print job from a user who is
either
• not authorized to print
or
• trying to print a color job and only
authorized to print black and white
job.
What to Do
The user should contact the system
Administrator to see if their
authorization can be changed.