Olympus C-2020ZOOM - Manual (Page 99)

99
CARD SETUP
ALL-FRAME ERASE
Set the Mode dial to , and
display a still picture.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select CARD
SETUP.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
.
Press the OK button to display
.
Press the OK button with YES
selected to erase all the
pictures in the card.
• To cancel, press the OK button
with NO selected.
When complete, NO PICTURE
appears on the LCD monitor.
• Protected frames will remain in
the card, and the last frame will
be displayed. (p. 95)
7
6
YES NO
5
4
3
2
1
Caution:
• Be careful not to erase important picture data by mistake as it cannot
be retrieved.
• Never open the card cover, eject the card, remove the batteries, or
pull the plug while erasing pictures. It may destroy the data in the
card.
• When a write-protect adhesive seal is placed on the card, the camera
does not enter the Erase mode.
1
6 5
4 3
P
A/S/M
OFF
P
OW
ER/MO
D
E
D
IA
L
2
SHQ
CARD
SETUP
MODE
SETUP
FUNCTION
32 [ 1 / 2 ]
YES NO