Olympus C-2020ZOOM User Manual

Page 107

107

When the buffer memory is
full, the upper block will light
and no other operation can be
performed until the upper
block goes off.

Note:
• Some noise may appear compared to a still picture.
• Do not push the LCD monitor forcibly.
• Pictures that appear on the LCD monitor are for composition purposes

only.

• It is recommended to use the optical viewfinder for less camera

movement and battery consumption.

• It will take longer to record when the LCD monitor is used.
• When the subject is viewed diagonally in the camera, the edges may

appear zigzagged on the LCD monitor. This is not a malfunction; it will be
less noticeable in Display mode.

• A strip of light may appear on the top/bottom of the LCD monitor, but this

is not a malfunction.

• When a picture is taken in a lighted area, such as in sunlight, vertical

lines may appear on the LCD monitor. This is not a malfunction.

• Printed images will be slightly cropped compared with what you see on

the LCD monitor.

F2.0 1/800 +2.0