Oki FAX 5780 User Manual
Page 39

|
T.37 Option Guide: English
39
DHCP Server
If you are working with a DHCP (Dynamic Host
Configuration Protocol) server, the following items are set
automatically.
1: IP ADDRESS
2: SUBNETMASK
3: DEFAULT GATEWAY
8: DNS P .SRV ADDRESS
Domain Name Service Primary Server
9: DNS S .SRV ADDRESS
Domain Name Service Secondary Server
!
The default DHCP setting is Enable.
!
When you enter an IP Address from the front panel of
your fax unit, the IP Address is used as a static IP
address. The DHCP setting is automatically disabled.
To enable the DHCP setting, use the Web Page,
OkiView 32, or Telnet functions.
After changing the network settings under User
Function 98, press MENU.
The machine goes into standby mode.
After a few seconds’ pause, the display shows that the
Network Card is being initialized. The data on the
Network Card is updated when this message disappears.
Do not press MENU again while the initialization
message is on display (after changing the settings);
if you do, the settings will not update correctly.
- C6050 (40 pages)
- B 6200 (32 pages)
- C5540MFP (1 page)
- C3530MFP (138 pages)
- B4545 MFP (154 pages)
- B4600 Series (104 pages)
- C5250 (83 pages)
- C 7300 (12 pages)
- C 5200n (82 pages)
- 5650 (2 pages)
- B6000 (6 pages)
- PRINTING SOLUTION B2400 (36 pages)
- B6000 Series (8 pages)
- B4000 (2 pages)
- 520 (68 pages)
- C5000 (6 pages)
- 80 Series (97 pages)
- Pos 407II (65 pages)
- OFFICE 87 (40 pages)
- C5900n (6 pages)
- LAN 510W (44 pages)
- 490 (94 pages)
- B 410d (84 pages)
- 42625502 (1 page)
- 84 (99 pages)
- 3391 (35 pages)
- C 130n (172 pages)
- C8800 (87 pages)
- C8800 (179 pages)
- B8300 (95 pages)
- 390 (135 pages)
- 390 (131 pages)
- ES3640E (220 pages)
- ES3640E (24 pages)
- 1220n (207 pages)
- C5200 (2 pages)
- OFFICE 86 (4 pages)
- CX 1145 MFP (177 pages)
- 8c Plus (24 pages)
- 2024/2024e (260 pages)
- FAX 740 (80 pages)
- PRINTER MPS420B (74 pages)
- C 7200 (2 pages)
- B4000 Series (2 pages)
- 2500 (80 pages)