Oki FAX 5780 - Manual (Page 28)

|
OKIFAX 5780/5980 28
LAN Print T.O.
User Function 82
It is impossible to judge whether printing data is not being
transmitted due to network delay or the end of the data
stream. This time-out configuration allows the device to
cancel a print job when no printing data can be found after a
specified time has elapsed since the last data was submitted.
Do not change the default configuration unless it is
absolutely necessary.
Settings are: 5 sec., 30 sec., 5 min.
Default Setting is: 30 sec.
POP Interval
User Function 83
Use this to set the interval between POP receptions.
If daily is selected, four slots (fields) are available for
programming.
·
Each slot (field) can can be programmed with a
different time
or
·
Times can be programmed into the slots (beginning
with Field 1) and the remaining slots can be left
blank.
Available settings are
Off, 1 min., 5 min., 10 min., 30 min., 60 min., Daily
The default setting is 5 minutes.