Using the listening modes —continued, Stereo source (2/2) – Onkyo TX-NR1007 User Manual
Page 79
79
Stereo Source (2/2)
✔: Available Listening Modes
Notes:
*1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the
“Speaker Configuration” setting (see page 90)).
*2 For 9ch output, output can be switched between the combination of Surround back and Front high, or Surround back and Front wide
speakers by pressing the [SP LAYOUT] button.
*3 If there are no surround back speakers, or Powered Zone 3 is being used, Dolby Pro Logic II is used.
*4 This listening mode can be selected only when all the following conditions are satisfied:
a. Center speaker is connected to the AV receiver.
b. Either of Front High speakers or Front Wide speakers is connected to the AV receiver.
*5 This listening mode is not available while you are using Zone 2 (“Not Available” will appear on the display). If you turn Zone 2 on during
the Pure Audio listening mode, the listening mode will change to Direct.
• Available sampling rate for PCM input signal is 32/44.1/48/88.2/96/176.4/192kHz.
• The listening modes cannot be selected with some source formats.
Listening Mode
Button
Speaker layout
PLII/PLIIx
Game*
3
THX Games
✔
✔
PLII/PLIIx Game
Audyssey DSX*
4
✔
*2
PLllz Height
THX Games
✔
Neural THX
Games
✔
✔
PLII Game
Ultra2 Games
✔
PLIIz Height
Ultra2 Games
✔
Orchestra
✔
✔
*1*2
Unplugged
✔
✔
*1*2
Studio-Mix
✔
✔
*1*2
TV Logic
✔
✔
*1*2
Game-RPG
✔
✔
*1*2
Game-Action
✔
✔
*1*2
Game-Rock
✔
✔
*1*2
Game-Sports
✔
✔
*1*2
All Ch Stereo
✔
✔
✔
*1*2
Full Mono
✔
✔
✔
*1*2
T-D (Theater-
Dimensional)
✔
✔
✔
✔
Neo:6 Cinema
DTS Surround
Sensation
✔
✔
✔
✔
Neo:6 Music
DTS Surround
Sensation
✔
✔
✔
✔
LH
RH
SBR
SBL
FL
FR
LW
RW
C
SL
SR
SW
SW
LH
RH
SBR
SBL
FL
FR
LW
RW
C
SL
SR
SW
SW
LH
RH
SBR
SBL
FL
FR
LW
RW
C
SL
SR
SW
SW
LH
RH
SBR
SBL
FL
FR
LW
RW
C
SL
SR
SW
*1
*1
*2
*2
*1
*1
*2
*2
*2
*2
SW