Olympus Motor Drive 2 - Manual (Page 30)

Care and Storage
29
Questions and Answers
Q: I have pressed the camera's shutter release.
A: If you then press the shutter release button of
the Motor Drive in the single mode, only the
film advance will be activated. If you press it
in the sequence mode, continuous shooting in-
cluding film advance is possible.
Q: I have operated the camera's shutter release
and film advance lever.
A: You can do these operations on the camera
even when the Motor Drive is attached. The
exposure counter will also operate normally.
Q: There are no batteries inside the Motor Drive.
What can I do?
A: The Motor Drive will operate if the power unit
is connected, but the LCD counter cannot be
used.
Q: I want to use the Motor Drive in low tempera-
tures.
A: In low temperatures, it may not operate pro-
perly because the battery performance will be
reduced. Try to keep its power section warm
by using the Relay Cord, for example.
Q: When rewinding the film, the motor does not
stop even after a certain time.
A: It is because the film is not engaged with the
rewind mechanism. Turn the rewind lever of
the Motor Drive as far as it will go. (The film