Olympus C-2/D-230 - Manual (Page 25)

25 En
En
PAUSING MOVIE PLAYBACK AND REVIEWING SPECIFIC MOVIE FRAMES
You can temporarily stop a movie at any frame during playback by pressing
any button on the
arrow pad (pause status).
The following operations are possible while the movie image is paused:
Press button Forward playback resumes from paused frame.
Press and hold button Fast-forward playback.
Press button Reverse replays starts from paused frame.
Press and hold button Fast-rewind playback.
Press button First movie frame is displayed.
Press button Last movie frame is displayed.
Note To play back another movie, first press the button twice to cancel the Movie
playback mode. Then select the desired movie indicated by the symbol and
select [ ] again from the menu to view.
CREATING AN INDEX OF SEPARATE MOVIE FRAMES
The Movie index mode allows 9 image frames to be selected automatically
and saved as a separate still image.
1 Close the lens barrier and press the button.
The camera turns on in the Play mode.
2 Press the / buttons to display the movie you want to see
(indicated by a symbol) and press the button.
The monitor shows the Play menu.
3 Select [EDIT] using the / buttons and press the button.
4 Select [ INDEX] using the / buttons and press the
button.
5 Select [ INDEX] using the / buttons and press the
button.
The movie is displayed in an index display of still pictures.
The index image is saved as separate image from the original movie.
Note • You can not select the first and last frame of a movie.
• The interval between the frames that are automatically picked out varies
depending on the recording time of the movie.
• The Movie index mode can create only a 9-image display.
MUTING THE BEEP TONES
This function enables you to turn off the beep tones.
1/Basic06_C2-E.65E 01.8.17, 10:07 AM 25