Setting parameters on a linux platform, To set parameters using the ethtool utility, To set parameters using the – Oracle Audio Technologies Sun Oracle SunDual 10GbE XFP User Manual

Page 54

Sun Dual 10GbE XFP PCI Express Card User’s Guide • May 2010

Setting Parameters on a Linux Platform

▼ To Set Parameters Using the ethtool Utility

1. Determine which parameters are available using the ethtool utility:

# ethtool -help eth4

ethtool version 1.8

Usage:

ethtool DEVNAME

ethtool -a DEVNAME

ethtool -A DEVNAME \

[ autoneg on|off ] \

[ rx on|off ] \

[ tx on|off ]

ethtool -c DEVNAME

ethtool -C DEVNAME \

[adaptive-rx on|off] \

[adaptive-tx on|off] \

[rx-usecs N] \

[rx-frames N] \

[rx-usecs-irq N] \

[rx-frames-irq N] \

[tx-usecs N] \

[tx-frames N] \

[tx-usecs-irq N] \

[tx-frames-irq N] \

[stats-block-usecs N] \

[pkt-rate-low N] \

[rx-usecs-low N] \

[rx-frames-low N] \

[tx-usecs-low N] \

[tx-frames-low N] \

[pkt-rate-high N] \

[rx-usecs-high N] \

[rx-frames-high N] \

[tx-usecs-high N] \

[tx-frames-high N] \

[sample-interval N]

ethtool -g DEVNAME

ethtool -G DEVNAME \

[ rx N ] \

[ rx-mini N ] \