Oracle Audio Technologies Sun Oracle SunDual 10GbE XFP - Manual (Page 51)

Chapter 5 Configuring the nxge Device Driver Parameters 41
d. The following example shows ports on two different cards being set. Only
one node needs to be specified.
3. Save the nxge.conf file.
Tuning for Maximum Performance on a
Solaris Platform
Tuning for maximum performance in a Solaris platform depends on whether you
are using an UltraSPARC CPU based platform or an AMD CPU based platform.
▼ To Improve Performance on an UltraSPARC
CPU Based Sun Platform
1. Improve performance by adding the following /etc/system file:
Increasing the MSI improves the Rx performance. The default value for MSI is 2,
but changing it to 4 improves performance (8 can be used for UltraSparc-T1 based
systems).
2. Reboot the system:
name = "pciex108e,abcd" parent = "/pci@780/pci@0/pci@8/" unit-address = "0"
class-opt-ipv4-tcp = 0x100;
name = "pciex108e,abcd" parent = "/pci@7c0/pci@0/pci@9/" unit-address = "0"
class-opt-ipv4-tcp = 0x40;
# set ddi_msix_alloc_limit=4
# reboot -r