Onkyo PR-155X - Manual (Page 17)

17
Connections —Continued
• Refer to the Instruction Manual of your amp as well as the instructions given here.
• Before you make connections, turn off the power of all the equipment you’re going to con-
nect, and disconnect all power cords from electrical outlets. Don’t plug in the DV-S155X’s
power cord yet.
• When making connections, make sure that the plug is
inserted all the way into the jack.
Note
Since the DV-S155X contains components that are vulnerable to heat, don’t place it on top of an
amp or other source of heat. Doing so can cause malfunctions.
1 Connect an amp that supports Dolby Digital or DTS, such as the PR-155X
This allows you to enjoy Dolby Digital or DTS audio.
2 Connect the audio inputs of your television
■
Connecting the PR-155X
Use an optical cable to connect the DV-S155X’s AUDIO OUTPUT DIGITAL OPTICAL jack
to the optical digital input jack of your amp.
Use the included audio connection cable to connect the DV-S155X’s AUDIO OUTPUT ANA-
LOG jacks to the audio input jacks of your amp.
Tip
You can enjoy 5.1 ch playback with DVD video simply by connecting the digital jack. However
you will need to make the analog connections as well if you want to perform analog recording
from the DV-S155X onto an MD recorder or other device connected to the amp, or in order to
enable system operation with an Onkyo-manufactured amp.
Connecting your amp
Incomplete connection
Insert all the way in
DV-S155X PR-155X
DVD PLAYER
DV-S 155X
DVD/CD DIGITAL
OPTICAL IN
L
R
SW LV L CTRL STANDBY / ON STANDBY INPUT
SURROUND
MEMORY TIMER
CLEAR PHONES
MULTI JOG
AV CONTROLLER
MASTER VOLUME DTS PCM AAC DIGITAL DSP STEREO (GRN )
MULTI IN (RED )
PR - 155X
PUSH TO ENTER
PL
Optical cable (included)
Audio connection cable (included)