Opticon NFT 1125 - Manual (Page 54)

Manual No. 25-NFT1121-01
Series NFT-1121/2135 Mini CCD Fixed Position Scanners
25. Scanner Timeout (Trigger Enabled Mode only)
These commands, which are only applicable in the Trigger Enabled mode, establish the time-out period after
the trigger pulse is received. The Time-out period is the same whether the scanner is operating in Single,
Multiple or Continuous Read mode.
Page 48
Computer
Command
Function
/Description
Bar Code
Command
(Z7)
START/END
Programming Menu
,Z7,
Y0
Trigger remains ON
as long as trigger is pulled
(hardware trigger only)
,Y0,
Y1 1 Second after triggering
,Y1,
Y2 2 Seconds after triggering
,Y2,
Y3 3 Seconds after triggering
,Y3,
Y4 4 Seconds after triggering
,Y4,
Y5 6 Seconds after triggering
,Y5,
Y6 8 Seconds after triggering
,Y6,
Y7 10 Seconds after triggering
,Y7,