Oceanic Dive Computer Pro Plus 2 User Manual

Page 42

ATR

TO SET - PC SAMPLING RATE
(while in the Surface Mode)

Factory set at 15 seconds, the Sampling Rate can be set at
values of 2, 15, 30, or 60 seconds, or 2, 5, or 10 feet (.5,
1.5, or 3 meters).

• Press Both buttons simultaneously, release when SET: 2

appears (4 seconds).

• Press and release the Left (Advance) button, the Units

screen appears with the set point flashing.

• Press the Left (Advance) button 16 more times.

• The graphics SR and SECS appear with the Sampling

Rate value flashing (Fig. 40).

• Press and release the Right (Select) button advance the

Rate one selection at a time.

• Press the Left (Advance) button to accept the setting and

advance to Set Digital Gauge Mode, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.

NOTE: Sampling

Rate is the

interval at which

data samples are

recorded during a

dive for subse-

quent download

to the PC pro-

gram. This

setting has no

effect on dis-

played data or

data in the unit's

viewable Log.

Fig. 40 - Set PC Sampling Rate