Oceanic Dive Computer Pro Plus 2 - Manual (Page 31)

31
ATR
O 2
N 2
ATR
O 2
N 2
TO SET - TIME (while in the Surface Mode)
Set for factory local time, the Time can be set to values
between 1:00 and 12:59 (AM/PM) or 0:00 and 23:59.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
• Press the Left (Advance) button 2 more times.
• Time appears with the Hour value flashing (Fig. 26).
• Press and hold the Right (Select) button to scroll through
the Hour values in increments of one hour.
• Press the Left (Advance) button to accept the setting.
• The Minute value flashes (Fig. 27).
• Press and hold the Right (Select) button to scroll through
the Minute values in increments of one minute.
• Press the Left (Advance) button to accept the setting and
advance to Set Year.
Fig. 26 - Set Hour
Fig. 27 - Set Minute