Oricom ECO600 - Manual (Page 9)

About your phone
9 9
MAKING A CALL
This section describes the different ways to make a call.
1. Press .
2. Dial the phone number. The number displays on the screen and is dialed out.
Pre-dialing
Pre-dialing lets you view and make changes to the number before making the call.
1. Enter the phone number. The number displays on the screen. You can make
changes before dialing out.
2. Press to dial out the call.
Redialing the last number
1. Press .
2. Press . The last dialed number displays on the screen and is dialed out.
TIP:
Press to erase a digit.
Press and hold to enter a pause. P displays on the screen.
NOTE:
Signal Strength. Check the signal strength before making a call and
during a call. For details, see Checking the signal strength on page 8.
NOTE:
Low Battery. During a call, you will hear warning tones if your handset
is almost out of battery. Charge your handset as soon as possible or your call
will be cut off. Placing the handset on the charger will end the call. For details,
see Checking the battery level on page 8.
NOTE:
Emergency Call. This telephone is not designed for making emergency
telephone calls when the power fails. Alternative arrangements should be made
for access to emergency services.
NOTE:
Call Timer. During a call, the call timer displays the talk time of your
current call.
NOTE:
Your handset cannot make or receive calls if the base power is
disconnected or the handset is turned off.
TIP:
Use or to navigate the menus.