Oricom ECO600 - Manual (Page 20)

The System
20 20
The System
REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not
registered, you will not be able to make a call or use some of the functions and features on the
phone.
If your handset displays
UNREGISTERED
, follow the steps below to register your handset.
1. Press on the base unit for 4 seconds.
2. Press on the handset.
3. Select
SYSTEM Æ REGISTER
. Press .
4. Enter the system PIN (Pre-set: 0000).
5. Press 1 to select your base number. Your handset starts searching for the base.
Registration is completed within 30 seconds. If registration is successful, the signal
icon displays steadily. If registration failed, repeat the above procedure.
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1. Press .
2. Select
SYSTEM Æ DELETE HS
. Press .
3. Select the handset (number) you want to delete. Press .
4. Enter the system PIN. Use to make correction.
5. Press . The handset is deleted.
NOTE:
Your base can register up to 4 handsets. After registering 4 handsets,
your base unit registration memory is full. If you attempt to register an
additional handset, registration will not be successful.
NOTE:
Your handset is already registered when you buy 1-4 handset packs.
TIP:
Handset Number. The handset number displays beside the handset name
during standby.
TIP:
Use or to navigate the menus.