Onkyo DR-L50 - Manual (Page 30)

30 30
Press TEST TONE.
Each speaker emits the test tone (pink
noise) and the display shows the speaker
emitting the test tone in the following
order:
LEFT → CENTER
(Front left ch.) (Center ch.)
↑ ↓
SUBWFR RIGHT
(Subwoofer) (Front right ch.)
↑ ↓
SURR L ← SURR R
(Surround left ch.) (Surround right ch.)
Set voume at a level for easy comparison
of all speakers’ output (around volume
level 50 is standard).
Note
No test tone will be emitted from a speaker
which is not included in the speaker
configuration on pages 28-30 even if it is
actually connected.
Press CH SEL repeatedly to select
the speaker, then press UP/DOWN
to adjust the volume level.
The volume level can be adjusted between
–12dB and +12dB.
2
Adjusting Each Speaker's Relative Volume Balance – Test Tone
Adjust each speaker’s relative volume balance so that the
volumes of all speakers’ test tones sound equal at the
listening position.
When you have completed the
adjustment by repeating step 2,
press TEST TONE.
The test tone stops and the normal display
resumes.
When test tone adjustments are
completed, return the volume to its usual
level.
Note
Even if you don’t press TEST TONE, the test
tone will stop after two minutes.
1
Remote controller
only
3
«
TEST TONE
COND.M
2
CH SEL
FUNC.M
3
UP
DOWN
9
SUBTITLE
SURROUND
9
6
TEST TONE
COND.M
2
TV/ SETUP TV/ SETUP
TEST TONE SP SETUP CH SEL
DISTANCE SW MODE UP
TV MUTING
TV POWER TV INPUT
T-D SETUP IPM DOWN
TV VOL +
TV VOL -
9
TV CH - TV CH +
VOLUME
ON
STANDBY INPUT SELECTOR
RECEIVER
COND.M LAST M FUNC.M
ANGLE AUDIO SUBTITLE
T-D/ ST LATE NIGHT
TOP MENU MENU
RETURN DVD
SETUP
REPEAT
TUNING TUNER PRESET
MD / CDR / TAPE
A-B STEP/ SLOW
TIMER
CLEAR
PROGRAM
SEARCH
ACOUSTIC
CONTROL
SURROUND
RANDOM
--/---
MODE
SLEEP
MUTING
DIMMER DISPLAY CLOCK
MODE
+10 0 SHIFT
9
4 5 6
7 8
1 2 3 TEST TONE
UP/DOWN
CH SEL
Speaker Setup
Before operating the
remote controller
Press MODE TV/SETUP.