Olivetti P26W User Manual
Page 57
Microsoft Windows> 57
(c)
Follow the instructions on the screen to finish
installing the TCP/IP printer.
Port 9100
1.
Select [Start], [Settings], [Control Panel].
2.
Open the [Printers] folder.
3.
Double-click [Add Printer] and then select [Next].
4.
Select [Local Printer], clear the [Automatically detect my
printer] check box and then click [Next].
5.
Select [Create a New Port] and select [Standard TCP/IP
Port].
6.
Select [Next].
7.
The [Welcome to the Add Standard TCP/IP Printer Port
Wizard] will appear.
8.
Select [Next] and provide the following information. Enter
[Printer name] or IP address, for example: 192.168.1.31.
If the above IP address is entered, the Port Name will
default to IP_192.168.1.31.
9.
Select [Next]. Additional port information will be required.
10.
Under [Device Type], select [Custom] then [Settings].
11.
Ensure [Protocol] is set to [Raw].
12.
Ensure [Port Number] is 9100 and [SNMP Status Enabled]
is deselected.
13.
Select [OK].
14.
Select [Follow the instructions on the screen to finish
installing the printer.]
IPP
1.
Select [Start], [Settings], [Control Panel and Printers].
2.
Open the [Printers Folder].
3.
Double-click [Add Printer] and then select [Next].
4.
Select [Network Printer].
5.
Select [Next].