Olivetti P26W - Manual (Page 50)

Network Configuration> 50
P
RINTING UTILITY
— M
ANUFACTURERS
’ LPR
The LPR Utility is a utility that allows printing data to printers
connected to the network via TCP/IP. This utility is for use with
Windows XP, Windows 2000, NT4.0.
The utility is for those printers which support TCP/IP and redirects
printing data to the lpr port of the specified IP address.
S YSTEM R EQUIREMENT
Windows XP/2000/NT4.0/Windows Server 2003 with TCP/IP
support and printers that support TCP/IP.
T O INSTALL THE LPR UTILITY
The LPR utility requires that the TCP/IP protocol should be
installed into your Windows system. To install the TCP/IP protocol
into your Windows system consult your Windows manual.
NOTE:
Windows XP/2000 requires administrator privileges.
1. Set up the printer driver by designating the output
destination to [Local Printer (LPT1:)]. For information on
setting up your printer driver, see the printer user
manual.
2. Insert the Network Software CD-ROM into the CD-ROM
drive. The Setup Utility starts automatically. If it does not
start, double-click setup.exe on the CD-ROM.
3. Select [Software Utilities].
4. Select [Install LPR].
5. Follow the on-screen instructions.
6. Click [Next] when the [Welcome] screen is displayed.
7. Verify [Destination Folder] and [Spool Folder] and click
[Next].
8. Check [Register in Startup] if you want automatic startup
as Windows boots up. Check [Launch as minimized] if you
want to startup in the Icon state and click [Next].
9. Verify the program folder name and click [Next]. The
installation starts.