Zone 2, Connecting zone 2 – Onkyo TX SR607 User Manual

Page 85

Zone 2

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you
can select a different source for each room.

There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.

Connecting Your Zone 2 Speakers Directly
to the AV receiver

This setup allows 5.1-channel playback in your main
room and 2-channel stereo playback in Zone 2, with a
different source in each room. This is called Powered
Zone 2, as the Zone 2 speakers are powered by the AV
receiver. Note that when Powered Zone 2 is turned off,
you can enjoy 7.1-channel playback in your main room.

Hookup
• Connect your Zone 2 speakers to the AV receiver’s

ZONE 2 L/R speaker terminals.

(North American/Taiwan models)

(Other models)

Notes:
• With this setup, the Zone 2 volume is controlled by the

AV receiver.

• Powered Zone 2 cannot be used if “Speaker Type” is

set to “Bi-Amp” (see page 43).

Connecting Zone 2

To use this setup, you must set the “Powered Zone 2”
setting to “Act” (see page 86).

Main room

Zone 2

AV receiver

Main room

Zone 2

AV receiver