Olympus DS-61 - Manual (Page 31)

31
2
Using the
V
ariab
le Contr
ol
V
oice Actuator
1 While the recorder is stopped or
during recording, press the
MENU
button for 1 second or longer.
The menu opens. (
☞ P97, 99)
2 Press the
+
or
–
button to choose
[VCVA].
3 Press the OK or 9 button.
4 Press the
+
or
–
button to choose
[Standby Monitor].
5 Press the OK or 9 button.
The [Standby Monitor] setup process begins.
6 Press the
+
or
–
button to choose
between [On] and [Off].
7 Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
8 Press the STOP button to close the
menu.
If it returns to the menu screen during recording,
press the 0 button to close the menu screen.
Using the Variable Control Voice Actuator (VCVA)
8
3,5,7
4,6
1
2
VCVA standby monitor setting
When [Standby Monitor] is set to [On] with the menu setting, the recording will not be
output from the earphone while in VCVA standby.
When you monitor your recording with the earphone connected, you can check whether
VCVA is launched or not by checking if an audio is output.