Olympus DS-61 - Manual (Page 123)

123
8
USB Micr
ophone/USB Speaker
Uses as a USB Speaker
When the recorder is being used as a USB
speaker, it is possible to output the sound
through the recorder, rather than from the
speakers attached to a computer.
When using the recorder as a USB speaker,
switch the recorder to the [Audio] mode in
the [Audio Setup] described above, then
perform the following setting.
Select the [Select Audio Output] from the [Tools] in the menu bar, and change
the output destination.
USB Microphone/USB Speaker
It is possible to use the recorder as a USB microphone or speaker with the DSS Player, to
insert/add/overwrite recordings onto voice files downloaded onto a computer, or to save new
recordings directly onto a computer.
In addition, it is also possible to operate the DSS Player using buttons on the recorder.
Audio set up
In order to use this recorder as a USB speaker or a USB microphone in DSS Player, it is
necessary to change to [Audio Class] after connecting to the computer in the [Storage Class].
When changed for the first time, the driver will be installed into the computer.
After connection, execute the following settings.
Click the icon in the toolbar to change the recorder to Audio device.